M.2 Module Family
Our M.2 modules, co-developed by Embedded Artists and Murata, are designed for evaluation, integration and ease-of-use:
- You lower your risk and cost by using our professionally designed and proven M.2 modules!
- You can easily evaluate different Wi-Fi/BT solutions – by just switching M.2 module!
- You can focus on your core application and shorten your time to market!
You get started immediately by following our getting started guides:
- Getting Started with M.2 modules and i.MX 6/7/8 (from Linux v5.4) using our iMX Developer’s Kits V2
- Getting Started with M.2 modules and i.MX 6/7/8 (up to Linux v4.14) using our iMX Developer’s Kits V2
- Getting Started with M.2 modules and i.MX RT using our iMX RT1062 Developer’s Kit
Our M.2 Primer Package contains general information about the M.2 standard, reference schematics and an integration guide how to integrate an M.2 module in your next embedded design.
Murata has a couple of landing pages, in US, EU and ASIA areas, presenting our joint support for NXP’s i.MX application processor family.
M.2 Modules
1DX M.2 Module
- 802.11 b/g/n and BT/BLE 4.2
- SDIO 2.0 interface, SDR25@50MHz
- Chipset: Infineon/Cypress CYW4343W
1MW M.2 Module
- 802.11 a/b/g/n/ac and BT/BLE 5.0
- SDIO 3.0 interface, SDR100@200MHz
- Chipset: Infineon/Cypress CYW43455
1CX M.2 Module
- 802.11a/b/g/n/ac 2x2 MIMO and BT/BLE 5.0
- PCIe interface, in M.2 form factor (22 x 30 mm)
- Chipset: Infineon/Cypress CYW4356
1LV M.2 Module
- 802.11 a/b/g/n/ac-friendly™ and BT/BLE 5.0
- SDIO 3.0 interface, SDR40@80MHz
- Chipset: Infineon/Cypress CYW43012
1ZM M.2 Module
- 802.11 a/b/g/n/ac and BT/BLE 5.1
- SDIO 3.0 interface, SDR104@208MHz
- Chipset: NXP 88W8987
1YM M.2 Module
- 802.11a/b/g/n/ac 2x2 MIMO and BT/BLE 5.2
- PCIe interface, in M.2 form factor (22 x 30 mm)
- Chipset: NXP 88W8997
1XA M.2 Module
- 802.11a/b/g/n/ac 2x2 MIMO and BT/BLE 5.1
- PCIe interface, in M.2 form factor (22 x 30 mm)
- Chipset: Infineon/Cypress CYW54591