1YN M.2 Module

Wi-Fi 11b/g/n + Bluetooth 5.2 Module

Out of stock

Available July 2021

LOADING
  • 802.11 b/g/n + BT5.2
  • SDIO 3.0 interface, SDR25@50MHz
  • Chipset: Infineon/Cypress CYW43439
Image of 1YN M.2 Module

The 1YN M.2 module, co-developed by Embedded Artists and Murata, is designed for evaluation, integration and ease-of-use.

You get started immediately by following our getting started guide:

Our M.2 Primer Package contains general information about the M.2 standard, reference schematics and an integration guide how to integrate an M.2 module in your next embedded design.
Murata has a specific landing page presenting our support for NXP’s i.MX application processor family.

For full specification on 1YN module (LBEE5KL1YN) see Murata’s 1YN product page and 1YN datasheet.

Module
Murata moduleLBEE5KL1YN, also known as Murata 1YN
ChipsetInfineon/Cypress CYW43439
WLAN
Standards802.11b/g/n/ac
NetworkAP and STA dual mode
Frequency2.4 GHz
Data rates11, 54, 65 Mbps
Host interfaceSDIO 3.0, SDR25@50MHz and DDR50
Bluetooth
Standards5.2 BR/EDR/LE
Power ClassClass 1
Host interface4-wire UART@4MBaud
Audio interfacePCM for audio
Powering
Supply voltage3.3V (3.0-3.6V)
Receive mode current (WLAN)47 mA typical
Transmit mode current (WLAN)320 mA typical
Mechnical
M.2 standardType 2230-S3-E
Width 22 mm, length 30mm, component height 1.5 mm and E-key connector
Measurements22x30 mm without trace antenna, 22x44 mm with trace antenna
Weight1.5 gram
Temperature
-10 to +55 degrees Celsius
Product Classification and Status
Integration board; Sampling
Flyers and specifications
Generic M.2 module 3D-models
Documentation and guides
Getting Started with M2 modules and iMX6/7/8 from Linux v5.4
M.2 Primer