iMX RT1176 Developer’s Kit

LOADING
  • Evaluate the iMX RT1176 uCOM board
  • M.2 connector for Wi-Fi/BT module
  • All relevant interfaces are available
Image of iMX RT1176 Developer’s Kit

The iMX RT1176 uCOM Developer's Kit lets you get up-and-running quickly with the iMX RT1176 uCOM board. All relevant interfaces are available for evaluation and prototyping.

What is included when buying a kit?

  • iMX RT1176 uCOM board
  • uCOM Carrier board
  • Second Ethernet adapter
  • MIPI-to-HDMI bridge adapter
  • 12V power supply
  • Micro-B to A USB cable
  • MCU-Link debug adapter

The uCOM Carrier board is a reference design for custom carrier boards using Embedded Artists’ uCOM boards.

Many RF solutions
The on-board connectors such as M.2 (both E-key and B-key), Mikrobus and SDIO makes it simple to add RF solutions. Our family of Wi-Fi/BT M.2 modules based on Murata modules with NXP and Infineon chipsets are directly supported. Note that drivers may not exist for all chipsets – check availability.

Do you want to know more?

Connectors and interfaces
DF40C 100/40-pos connectors for uCOM boards
M.2 E-key connector (with SDIO, PCIe and USB interfaces connected) - for Wi-Fi/BT M.2 modules
M.2 B-key connector (with PCIe, USB and SIM card holder interfaces connected)
1000/100/10 Mbps Ethernet RJ45 connector
USB OTG interface
USB Host interface
uSD memory card connector
Dual UART-to-USB FTDI bridge for console connections
Display interface (MIPI-DSI), dual connectors
Display interface (parallel RGB) with backlight control. Note: Feature not accessible with standard mounting option for the iMX RT1176 uCOM board.
Camera interface (MIPI-CSI), dual connectors
Debug interface with 2x5 pos 50 mil pitch Cortex debug connector
Mikrobus interface connector for Click boards™
Expansion connectors for accessing uCOM board signals
Power
12V (+-30%) supply voltage, with reverse polarity protection
External VBAT power input (for uCOM RTC)
Current measurement possibilities in supply voltages
5V/5A DC/DC supply to uCOM
Dimensions
152 x 152 mm
Five 4.3mm holes for mounting and grounding
Other
2-port USB Hub
On/Off, Reset, ISP Enable, Wakeup and user pushbuttons
RGB-LED, LEDs, I2C-GPIOs and I2C-PWMs
Pads for mounting QSPI flash memories
Adapter for second 100/10 Mbps Ethernet PHY
Adapter for MIPI-DSI to HDMI. Note that driver is not yet available.
Product Classification
Evaluation board

Note: Specifications for the uCOM board is available on the iMX RT1176 uCOM board page.