iMX6 SoloX COM Board
[High Resolution Photos]
iMX6 SoloX COM Board

Embedded Artists' iMX6 SoloX COM Board is equipped with NXP's Cortex-A9/Cortex-M4 based i.MX 6SoloX processor suitable for a wide range of industrial applications that requires advanced communication, real-time control and high quality graphic displays.

The heterogeneous multiprocessing architecture enables the system to run an OS like Linux on the Cortex-A9 and a Real-Time OS (RTOS) on the Cortex-M4.

Use the iMX6 SoloX Developer's Kit to get up-and-running quickly with the board.


Please contact Embedded Artists for a quote request.




Benefits of using i.MX 6SoloX



Processor NXP ARM Cortex-A9/Cortex-M4 i.MX 6SoloX 1 GHz (227 MHz for Cortex-M4 core)
Memory 1 GByte DDR3L 800 MT/s, 32-bit databus
4 GByte eMMC NAND Flash for OS and bootloader
16 MByte QSPI NOR Flash (2x8 MByte) for Cortex-M4 code
Graphics output LVDS: 18/24 bit, up to 85 Mpixels/sec, for example WXGA (1366 x 768 px) at 60 Hz
Parallel RGB: 24-bit up to WXGA (1366 x 768 px) at 60 Hz
Graphics Engine: GPU (GC400T) supporting OpenGL ES 1.1/2.0, OpenVG 1.1 APIs
Graphics input CMOS sensor interface (camera), parallel interface
NTSC/PAL analog video input interface (4 ch)
Ethernet Dual 10/100/1000 Mbps Gigabit Ethernet interfaces based on Atheros AR8031 Ethernet PHY
I/O i.MX6SoloX peripherals (see i.MX 6SoloX datasheet for details about peripherals):
• PCIe; 1x lane, v2.0
• USB; 1x USB 2.0, 1x USB 2.0 OTG
• Audio; up to 4 I2S/AC97 ports
• SPDIF; 1 channel
• Serial Port; 6x UART
• SPI; 5x eCSPI
• CAN; 2x CAN bus 2.0B
• I2C; 4x channels
• ADC; 8 12-bit inputs
• PWM; 8x channels
See iMX6 SoloX COM Board Datasheet for details about available pins/peripherals.
Mechanical 82 x 50 mm (W x D), SMARC form factor but different pinning for better carrier board routing
Power +3.3V power supply voltage
Power consumption: See datasheet for details, but 1-2 Watt typical when active
Connectors 314 pos MXM3 edge connector, 0.5mm pitch
10 pos, 0.5mm pitch FPC for JTAG
Environment Operating Temperature: 0 - 70 degrees Celsius or -40 to +85 degrees Celsius
Operating Humidity: 5 - 90% relative humidity, non-condensing
Other • i.MX 6SoloX on-chip RTC
• On-board watchdog functionality
• Integrated power management with PMIC (PF0200) supporting DVFS techniques for low power modes
Product Classification
and Status
Integration board; Volume

Documentation and Resources

Flyers and specifications

Documentation / guides

Product notes / changes


Software resources

Getting started with iMX Developer's Kit

Getting started with iMX Developer's Kit landing page

Webinar: Managing Inter-Processor Communication

Related Products