2LL M.2 Module

Dual Band Wi-Fi 6, 802.11a/b/g/n/ac/ax SISO + Bluetooth 5.4 + IEEE802.15.4 Module
LOADING
  • Wi-Fi 6, 802.11 a/b/g/n/ac/ax SISO HE20/MCS9
  • Bluetooth 5.4 LE
  • IEEE802.15.4
  • SDIO 3.0 or USB2.0 interface
  • Chipset: NXP IW610G
Image of 2LL M.2 Module

We have partnered with Murata to design the 2LL M.2 module, suitable for evaluation, integration and ease-of-use.

You get started immediately by following our getting started guide:

Our integration guide help you integrate an M.2 module in your next embedded design. It for example contains general information about the M.2 standard and reference schematics

Murata has a specific landing page presenting our support for NXP’s i.MX application processor family.

For full specification on 2LL module (LBES0ZZ2LL) see Murata’s 2LL product page and 2LL datasheet.

Module
Murata moduleLBES0ZZ2LL, also known as Murata 2LL
ChipsetNXP IW610G
WLAN
Standards802.11a/b/g/n/ac/ax SISO HE20/MCS9, Wi-Fi 6
NetworkAP and STA dual mode
Frequency2.4 GHz & 5 GHz bands
Data rates114.7 Mbps
Host interfaceSDIO 3.0, SDR25@50MHz, SDR50@100MHz, SDR104@208MHz, DDR50@50MHz or USB2.0
Bluetooth
Standards5.4 LE, 2MPHY
Power ClassClass 1.5
Host interface4-wire UART@4MBaud or USB2.0
Audio interfacePCM for audio
IEEE802.15.4
Host interfaceSPI
Powering
Supply voltage3.3V (3.0-3.6V)
Receive mode current (WLAN)95 mA typical
Transmit mode current (WLAN)570 mA typical
Mechnical
M.2 standardType 2230-D5-E
Width 22 mm, length 30mm, component height 1.5 mm and E-key connector
Measurements22x30 mm without trace antenna, 22x44 mm with trace antenna
Weight1.5 gram
Temperature
-40 to +85 degrees Celsius
Product Classification and Status
Integration board; Sampling