1XA M.2 Module

Dual Band Wi-Fi 5, 802.11 a/b/g/n/ac 2x2 MIMO + Bluetooth 5.2 Module
LOADING
  • Wi-Fi 5, 802.11 a/b/g/n/ac 2x2 MIMO, RSDB
  • Bluetooth 5.2 BR/EDR/LE
  • PCIe interface, in M.2 form factor (22 x 30 mm)
  • Chipset: Infineon/Cypress CYW54591
Image of 1XA M.2 Module

We have partnered with Murata to design the 1XA M.2 module, suitable for evaluation, integration and ease-of-use.

You get started immediately by following our getting started guide:

Our integration guide help you integrate an M.2 module in your next embedded design. It for example contains general information about the M.2 standard and reference schematics.

Murata has a specific landing page presenting our support for NXP’s i.MX application processor family.

For full specification on 1XA module (LBEE5XV1XA) see Murata’s 1XA product page and 1XA datasheet.

Module
Murata moduleLBEE5XV1XA, also known as Murata 1XA
ChipsetInfineon/Cypress CYW54591
WLAN
Standards802.11a/b/g/n/ac 2x2 MIMO (5G MIMO), RSDB (Real Simultaneous Dual Band), Wi-Fi 5
NetworkAP and STA dual mode
Frequency2.4 GHz & 5 GHz bands
Data rates11, 54, 144, 300, 866 Mbps
Host interfacePCIe
Bluetooth
Standards5.2 BR/EDR/LE, 3MPHY
Power ClassClass 1
Host interface4-wire UART@3MBaud
Audio interfacePCM for audio
Powering
Supply voltage3.3V (3.3-3.6V)
Receive mode current (WLAN)TBD mA typical
Transmit mode current (WLAN)TBD mA typical
Mechanical
M.2 standardType 2230-S3-E
Width 22 mm, length 30mm (without trace antenna), component height 1.5 mm and E-key connector
Measurements22x30 mm
Weight1.5 gram
Temperature
-40 to +85 degrees Celsius
Product Classification and Status
Integration board; Volume
Flyers and specifications
1XA M.2 Datasheet
LBEE5XV1XA Product page at Murata
Generic M.2 module 3D-models
Documentation and guides
Getting started with M.2 modules - iMX 6/7/8/9
Integration guide
Conformity
General product compliance declarations