iMX7 Dual uCOM Board
[High Resolution Photos]
iMX7 Dual uCOM Board

Embedded Artists' iMX7 Dual uCOM Board is tiny - only 27 x 37 mm - but is a very powerful platform!

It is equipped with NXP's dual-core Cortex-A7/Cortex-M4 based i.MX 7Dual processor, lots of on-board memory and a very efficient Power Management IC from ROHM.

The board is perfect for battery-powered portable devices where space and power consumption are importnat parameters. The board is also suitable for a wide range of industrial applications that requires advanced communication, real-time control and graphic displays.

The module has low-power focus:

  • the iMX7 is very power efficient to begin with,
  • has on-board LP-DDR3 memory,
  • ROHM's PMIC has high conversion efficiency over a wide range of loads, and
  • has an on-chip battery charger

The heterogeneous system architecture enables the system to run an OS like Linux on the dual-core Cortex-A7 and a Real-Time OS (RTOS) on the Cortex-M4:

  • clear separation of real-time tasks from general server and graphical releated processing
  • can save power if the Cortex-M4 core performs preprocessing before the more power hungry Cortex-A7 cores are activated

Use the iMX7 Dual uCOM Developer's Kit to get up-and-running quickly with the board.


Please contact Embedded Artists for a quote request.




Benefits of having a heterogeneous Cortex-M4 core
(video presents the benefits on the i.MX 6SoloX and the benefits are exactly the same on the i.MX 7Dual)

TouchGFX Graphical Demo on iMX6UL / iMX7D



Processor NXP ARM Cortex-A7/Cortex-M4 i.MX 7Dual 1 GHz / 200 MHz for Cortex-M4 core
Memory 1 GByte LPDDR3 1066 MT/s, 32-bit databus
8 GByte eMMC NAND Flash for OS and bootloader
Graphics output Parallel RGB: 24-bit up to 1920 x 1080 pixels at 60 Hz
MIPI-DSI: 2 lanes
Graphics input CMOS sensor interface (camera), MIPI-CSI 2 lanes
Ethernet Dual 10/100/1000 Mbps Gigabit Ethernet interfaces on processor, requires off-board Ethernet PHY
I/O i.MX 7Dual peripherals (see i.MX 7Dual datasheet for details about peripherals):
• PCIe; 1x lane, v2.1
• USB; 2x USB 2.0 OTG
• Audio; 3x I2S
• SDIO; 2x SD3.0/MMC5.0
• Serial Port; 7x UART
• SPI; 4x eCSPI
• CAN; 2x CAN bus 2.0B (Note: not in industrial version)
• I2C; 4x channels
• ADC; 4ch 12-bit inputs
See iMX7 Dual uCOM Board Datasheet for details about available pins/peripherals.
Mechanical 27 x 37 mm (W x H) ultra compact board size
Power +3.3V power supply voltage
Power consumption: see datasheet for details, but typically much less than 1 Watt
Connectors • 70 pos DF40C connector, 0.4mm pitch
• Dual 100 pos DF40C connector, 0.4mm pitch
Environment Operating Temperature: 0 - 70 degrees Celsius (standard) or -20 to +85 degrees Celsius (extended, on request)
Operating Humidity: 5 - 90% relative humidity, non-condensing
• Integrated power management supporting DVFS techniques for low power modes
• Low power RTC
• Battery charger with Coulomb counter for battery fuel gauging. 5V nominal.
• White LED Driver, 25mA, up to 26V
Other On-board watchdog functionality
Product Classification
and Status
Integration board; Volume

Related Products