COM Carrier Board

LOADING
  • Many communication interfaces
  • Reference design for custom carrier boards
  • Included in Developer's Kit
Image of COM Carrier Board

The COM Carrier board is a reference design for custom carrier boards using Embedded Artists COM boards.

Single Board Computer (SBC)
Together with a COM board a Single Board Computer can be created, ready to be integrated into your product.

Many RF solutions
The on-board connectors such as M.2, SDIO, XBee makes it simple to add RF solutions. Murata WiFi/BT evaluation boards are directly supported.

Display solutions
It is easy to add a display to the carrier board using the COM Display Adapter.  See the page Display Solutions for COM boards for more details about how to add a display.

 

 

Connectors and interfaces
MXM3, 314-pos connector with standoffs for COM boards
Dual 10/100/1000 Mbps Ethernet RJ45 connectors
USB OTG interface with ESD protection
Dual USB Host interfaces (via USB Hub) with ESD protection
HDMI connector with ESD protection
uSD/MMC connector (MMC is in parallel with uSD, so either one can be used but not both)
Dual CAN transceivers with ESD protection and optional termination, accessible via Molex Micro-Fit 3.0 connectors
SATA connector
Internal UART connectors (compatible with FTDI cables)
XBee™ compatible interface connector
Mini PCIe connector for half and full-size cards, including SIM card holder and USB interface
FPC connectors for serial and parallel camera interface and serial display output (MIPI-DSI)
Dual LVDS connectors
Parallel RGB display interface connector
Expansion connectors for many COM Board signals
Audio codec with line out 3.5mm audio jack connector (with internal connector for microphone and line input and headphone output)
Power
12V (+-30%) supply voltage, either via internal ATX connector or via external Molex Micro-Fit 3.0 connector
Reverse polarity protection
Internal 3.3V/4A and 5V/3A (and 3.3V/3A for PCIe) DC/DC converters with high efficiency
Li-Ion / Li-Polymer battery charger for COM board RTC (note: battery not included)
Dimensions
165 x 104 mm (same size as a typical 7 inch LCD).
Five M3 holes for mounting and grounding
Other
On/Off and Reset pushbuttons
Input current measurement
Product Classification
Evaluation board

* Note: the used COM board must support the specific interface to make use of the carrier board interfaces/connectors.

Flyers and specifications
COM Carrier Board Flyer
COM Carrier Board Datasheet
COM Carrier Board 3D model
COM Carrier Board Schematics
COM Carrier Board 3D Models